logo TAIZHOU RONGDA AUTO SPARE PARTS CO.,LTD.
 
china English
 
 
Home About Us News Products Equipment Service Contact Us
  • banner
  • banner
  • banner
News
 
 
 
Company News
 
 
Industry News
 
 
Contact Us
 
 
Address:Kanmen Automobile and motorcycle pioneer park, Yuhuan, Zhejiang Province, China
Tel:0576-87551096
Fax:0576-87551095
Mobile:18806576677
E-mail:sales@tzroda.com
http://www.tzroda.com
 
 
News  
 
See driving nine recruit auto repair mode
Release time£º2014.12.27 News source£ºTAIZHOU RONGDA AUTO SPARE PARTS CO.,LTD. Browsing number£º
 

On the road must see nine recruit car repair, ensure the traffic worries, problems you know repair.

A, fan belt fracture. Can be broken belt with wire serial method or tied to take open the engine drove away.

Two, valve spring break. Off spring can be taken down, broken back the past twoinstalled, you can use. Such as spring break into a number of sections, the cylinder inlet, exhaust valve adjustment screw removed, the valve to maintain the closedcondition, let the cylinder stagnation task.

Three, into the outlet hose rupture. The break is not big, usable fabric coated with a layer of soap will Water Leakage place bandage; such as rupture is larger, the hose can be cut off in the middle of the break point, the last of bamboo or iron, and tied with wire.

Four, the accumulation of the cup broke. With tape tube or plastic tube to the accumulation of cup in and out of the tubing, make oil without accumulation cup through.

Five, the tank damage. Flexible vehicle when in use, the fuel tank was found oil spills,leaks can be wiped clean, with soap or bubble gum on the leaks, temporary infarction;using epoxy resin adhesive patch, auto repair better effect.

Six, the oil spill Water Leakage. On the basis of trachoma size, choose the appropriate size of the electrical fuse, hammer slightly the smashing into the sand hole, you can remove the oil spill, Water Leakage.

Seven, the pipe joint leakage. Available cotton wrapped in a horn lower margin, then the tubing nut and tighten the oil pipe joint; also can chew bubble gum or maltose into a paste, coated tubing nut mouth, until dry coagulation after sealing function.

Eight, the oil pipe rupture. Tubing break can be break wipe clean, coated with soap,cloth or fabric wrapped around the pipe rupture, and tied with wire, and then coated with a layer of soap.

Nine, broken pipe. May find a broken pipe and the diameter of the tubing to rubber or plastic pipe. As the sleeve tight enough, both ends of the wire and then tied tight, to avoid leakage.

 
 
 
Copyright © 2014 TAIZHOU RONGDA AUTO SPARE PARTS CO.,LTD. ¡¡¡¡Tel£º0576-87551096 ¡¡¡¡Fax£º0576-87551095 ¡¡¡¡¡¡¡¡¡¡Technical Support:CENST